| JoeCustoms.com https://www.docs.joecustoms.com/forums/ |
|
| Any ideas for this mask? https://www.docs.joecustoms.com/forums/viewtopic.php?f=15&t=47849 |
Page 1 of 2 |
| Author: | DanOfTheDead [ Mon Jul 06, 2020 2:41 pm ] |
| Post subject: | Any ideas for this mask? |
Original McCullen mask from Skeletons in the Closet. I don't want to start from scratch and have never figured out a good base for it. Can anyone think of a part out there that might work as good starting point? Attachment: destromask.jpg [ 291.25 KiB | Viewed 4996 times ] |
|
| Author: | 2DARK2C [ Mon Jul 06, 2020 2:51 pm ] |
| Post subject: | Re: Any ideas for this mask? |
my first thought would be an over sized wrist gauntlet. i'll look in my kiss figure fodder. |
|
| Author: | bucky [ Mon Jul 06, 2020 4:01 pm ] |
| Post subject: | Re: Any ideas for this mask? |
A scalpel mask with some kibble from some boss fight armor? |
|
| Author: | chad_ghost [ Mon Jul 06, 2020 4:58 pm ] |
| Post subject: | Re: Any ideas for this mask? |
Baron Ironblood? |
|
| Author: | 2DARK2C [ Mon Jul 06, 2020 5:09 pm ] |
| Post subject: | Re: Any ideas for this mask? |
i looked and found some things to cut down fashion and do a whole lot of work. then i picked up a v2? stalker mask. that thing is a few spikes away from perfect. 
|
|
| Author: | DanOfTheDead [ Mon Jul 06, 2020 5:59 pm ] |
| Post subject: | Re: Any ideas for this mask? |
Huh... You might be right. Lots of solid ideas here, keep em coming if anyone thinks of more! |
|
| Author: | pluv [ Mon Jul 06, 2020 6:58 pm ] |
| Post subject: | Re: Any ideas for this mask? |
Don West's Helmet form the Lost in Space toyline. The visor goes up so it might be better than whatever that spiked rebreather thing is supposed to be. https://www.ebay.com/i/293578307415 Attachment: west.jpg [ 154.53 KiB | Viewed 4975 times ] |
|
| Author: | pluv [ Mon Jul 06, 2020 7:01 pm ] |
| Post subject: | Re: Any ideas for this mask? |
Matt Tracker's with some mods could work too, specifically cutting off the top and adding all the spikes. |
|
| Author: | pluv [ Mon Jul 06, 2020 7:12 pm ] |
| Post subject: | Re: Any ideas for this mask? |
If you're willing to do a complete headswap AND make mods. The Thor movie Destroyer is a decent place to start. |
|
| Author: | DanOfTheDead [ Mon Jul 06, 2020 7:42 pm ] |
| Post subject: | Re: Any ideas for this mask? |
These are great! |
|
| Author: | 2DARK2C [ Thu Jul 09, 2020 6:56 pm ] |
| Post subject: | Re: Any ideas for this mask? |
looking through specs swap shop this jumped out at me.  it might be a good place to start. he said : "I believe it is actually called thr Iron Cage. It came in 2 different pinatas. Dark Voyager and the giant pinata if I recall correctly. It os bigger than a head but could probably be trimmed and shaped to make a mask out of." |
|
| Author: | DanOfTheDead [ Thu Jul 09, 2020 7:12 pm ] |
| Post subject: | Re: Any ideas for this mask? |
Interesting, definitely see the potential |
|
| Author: | drbindy [ Thu Jul 09, 2020 9:04 pm ] |
| Post subject: | Re: Any ideas for this mask? |
I'm seeing a HACKS orc shoulder pad as the top half of the base plate |
|
| Author: | The Spectre [ Thu Jul 09, 2020 10:08 pm ] |
| Post subject: | Re: Any ideas for this mask? |
2DARK2C wrote: looking through specs swap shop this jumped out at me. it might be a good place to start. he said : "I believe it is actually called thr Iron Cage. It came in 2 different pinatas. Dark Voyager and the giant pinata if I recall correctly. It os bigger than a head but could probably be trimmed and shaped to make a mask out of." DAMN! I made a lot of typos. That is what happens when I try to return messages quickly in between delivering streets on my route LOL |
|
| Author: | 2DARK2C [ Fri Jul 10, 2020 1:16 am ] |
| Post subject: | Re: Any ideas for this mask? |
what's worse i didn't see one typo, the 3 times i read it 
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|