Title says it all.

Does anybody have instructions on Dis-Assembling a 30th Skystriker body?

_________________

You can't take it completely apart as the rear engine rings are solidly glued or melted in place. Take my word for it and don't try. You can get the wings completely out by removing most of the screws and just prying it apart far enough to get the proximal section out of the plane body. During reassembly you need to be very careful not to ding the paint on that piece. And you need to be careful of overspray getting into the landing gear housings. I usually have to touch those up on the inside with black paint if it was sprayed anything other than black. I have done several of these, they are more difficult than the original, but very possible to make it work.

_________________

Dis-assembly is the easy part, the question should be "Does anyone know how to reassemble a SkyStriker?"